芭乐视频下载

Current location: home page >Goodnews > News Product knowledge Product knowledge
Ningbo bearing on NTN bearing use process need to pay attention to!

In addition to its excellent quality, NTN bearing is also a very precise part. It is a high-performance NTN bearing. If it is used improperly in the use process, it will not only fail to achieve the expected performance effect, but also easily damage the NTN bearing. In terms of lubrication, we must have paid attention to it. Besides lubrication

NTN bearing in the use of the process, there are still those aspects need to pay attention to, small series today and everyone to discuss.

1、 When using and installing, it is required to be careful and careful. It is not allowed to punch the NTN bearing with a hammer directly, and it is not allowed to transfer pressure through the rolling element.

2、 Use appropriate and accurate installation tools, try to use special tools, and try to avoid using cloth and staple fiber.

3、 Try to keep the NTN bearing and its surrounding environment clean, even if the invisible smile dust enters the NTN bearing, it will increase the wear, vibration and noise of the NTN bearing.

4、 In the rainy season, the bearing should be coated with NTN antirust solution, and the bearing should be thoroughly cleaned with sweat oil after wet season. Under some special operating conditions, the life of NTN bearing is longer than that of traditional calculation, especially under light load. These special operating conditions are the surface damage that may occur when the rolling surface (track and rolling element) is effectively separated and limited by a lubricating oil film. In fact, under ideal conditions, the so-called permanent NTN bearing life is possible

  • Release: Goode bearings
  • Time: April 14, 2011
  • Views: 5306